Blamcon IR 4 Module Kit | Up to 85” TV / Arcade Machine

Blamcon Light Module kit to mount to your TV in edge or 4 corner configuration. This kit will also work in an arcade machine

4 Corner: 2 banks of LEDs on top and bottom edge of TV

4 corners Pattern is for third party compatibility. Single sensors also allow you to move them around if you want multiple 3rd party support. using this config gives you less lateral play area so we recommend moving these to blamcon bar spacing, 250mm, if you do. The build guide for this starts AFTER the bars section.  

Crosshair: One LED bank on each edge of your TV

Crosshair pattern is for compatibility with third party systems and is the hardest to mount. We do not recommend using this config only for Blamcon. Make sure you change your IR settings to crosshair in the free Blamcon ARC utility on steam. 

To learn more visit https://blamcon.com/blamcon-irbar/

Includes:

• • 4 Blamcon Emitters with 3 Osram SFH4547 IR LEDs in Each
  • 6.5M 28ga Wire
  • 1M LED Power Cable
  • Pan Head Screws - M3x10mm X 8
  • Pan Head Screws - M3x12mm X 8
  • Cap Head Screws - M3x16mm X 8